标准

Standard

Australian-New Zealand AS 1530 part 3
 

Principle

 Ignitability, flame propagation, heat release and smoke release are determined simultaneously by means of a vertical heat source.

Test method

A test specimen is mounted vertically and brought in front of a heat source, which is a vertical gas-fired ceramic panel. At definite intervals the specimen is moved closer to the heat source in a series of graded steps until ignition occurs.
During the exposure of the specimen a small gas pilot flame is held in front of the specimen to ignite gasses given off but not the surface of the specimen.

The ignitability index (~the mean time to ignite), the spread of flame index, the heat evolved index and the smoke developed index are calculated.

Result

 Based on the calculated values the test material passes or fails the test.

實驗室

 A.W.T.A.
Level 1 191 Racecourse Road
3031
Flemington Victoria
Contact person: Marianne Kingma
Tel: +613 9371 2424
Fax: +613 9371 2499
Australia